FEHERGUARD
LOW
PROFILE
Reel
System
The Low Profile In-ground Reel System is engineered for placement under Diving Boards. The design solves many of the problems that limit the use of higher profile reels.
The unique aspect of our Low Profile System is its capacity that will meet many residential Solar Reel needs.
-
Designed to fit rectangular pools 14'8' to 20' wide by 40' long (4.47m to 6.07m wide by 12.2m long) with up to 6" (15.24cm) radius corners.
-
Readily stores under diving boards with an existing 10" (25.4cm) of clearance.
-
A 40' (12.2m) solar cover rises about 8" (20.3cm) over the deck level.
-
Tubes are anodized with Silver Guard Finish to reduce tarnishing.
Available in our retail stores only-contact us for more information.
|
FeherGuard
Reels Can Be Used with Virtually Any Shape of Pool
|
|||||
 |
Rectangular
Pools (2' radius or less)
Place the reel at the pool end with the straps attached to the end of the blanket. Fold any extended blanket sections onto the main blanket so it will flow freely onto the reel. |
||||
 |
Oval
Pools and Rectangular Pools with wide radius corners
The reel should be positioned at the widest point of the pool. The straps are attached at that point of the blanket. |
||||
 |
Kidney,
Round or other shaped pools As a general rule of thumb on irregular shaped pools, the reel is placed across the widest point of the pool. On some kidney shapes and pools with steps, fold the extended blanket section in to form a straight line, in order to avoid catching on the side of the pool. |
||||
©
2018 POOL SPA USA
Terms of Use
Terms of Use