|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
|
PRODUCTS > Pool Products > Handicap Accessories > Model AG72
The Pool Lift Model AG72 is specifically designed for above-ground therapy pools with walls up to 6'. Note that a higher transfer height at deck level may be required for pools with 6' walls. This model can also access a raised deck or porch and can be built inside or outside the raised deck structure. The stainless steel plate at the base of the cylinder is bolted to the floor and a stainless steel bracket around the top of the cylinder is bolted to the top pool flange or raised deck.
Aquatic Access manufactures lifts for above-ground applications, including pools, spas, hot tubs, and therapy pools. Standard lifts are water-pressure powered. Lifting capacities above are based on operating (flowing) pressure. A static pressure measurement (no water flowing) may have to be approximately 10% higher to achieve the rated load. Seats may be forward-facing (cylinder behind seat) or side-facing (cylinder on left or right of seat) and can be fitted with any combination of one or two stationary armrests (standard), one or two flip-up armrests (optional), or none.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
|
©
2018 POOL SPA USA
Terms of Use |
|||||||||||||||||||||||||||||||||||||||||||||||||||||